Technical overview:
the working principle of CM Series powder mixing machine is that the materials is cut in their section more than 1,800 times every minute, and then the formed smallest unit is mixed with and become part of the composition of new materials. Therefore the mixed materials obtained are uniform and keep the original materials granularity. The blades of the machine has a special Layout to ensure that the materials are experienced a 3-D movement of radial, circumferential and axial, and to form a integrated cycle progress and a continuous mix to achieve uniformity of the compositions in a short time. Accordance with sampling standards of GB/T176-1996, its standard deviation S is ≤ 1.62.
Introduction
CM Series powder mixing machines are developed for powder milling process of cement industry by WASURE company. It can be applied either to that the milled raw cement is mixed according to required ratio to form the various grades of cements, or that the slag and fly ash
are mixed into the cement uniformally according to the required ratios to produce various grades of cements. This achieves any "blending" of variety kinds and grades of cements based on the requirements and make it possible for cement enterprises to produce multi-types
cements conveniently, flexibly and more efficiently. CM series are also applied in the mixture of multi compositions of dry raw materials in the pharmaceutical, chemical, feed industry.

Technical features:
1, CM Series powder mixing machine is an online continuous mixing equipment, especially
suitable for the cement industry without the special maintenance;
2, CM Series powder mixing machine requires only a small using area of ground. It can be
installed flexibly and simply either under or on the ground and also overhead. Besides it can
be placed in the top of cement or cement silo of packing device, which has a high applicability
of the technology;
3, CM Series powder mixing machine with humane design has a flexible, safe and convenient
operation control.
4, its effect of homogenization treatment is good and the standard deviation S is <1.62;
5, its Operation is simple and electric power-saving;
6, its Electric control part can be configured DCS interface for remote computer control easily.

Type and technical parameters

The sizes are different by different types, and the sizes of level installation see the following table:

Applications
CM Series powder mixing machine is online continuous mixing equipment, the application as
the follows:
1. Applicable broadly to two or more powdery materials being mixed to form a
multi-component synthesis.
2. Applicable to slag powder, fly ash (dry ash), limestone powder, shale powder and other
composition of cement being mixed with cement.
3. Applicable to slag powder, fly ash (dry ash), limestone powder, shale powder and other
composition of cement being mixed with clinker according to a certain proportion to form
various grades of cement.
4. Applicable to dry powder materials being mixed by a certain ratio in industries of
pharmaceutical, and chemical.
5. Applicable to the mixing of multi compositions of dry powder under 100 ℃.